{"id":13212,"date":"2020-01-04T12:44:52","date_gmt":"2020-01-04T12:44:52","guid":{"rendered":"https:\/\/www.onlinecprcertification.net\/blog\/?p=13212"},"modified":"2025-07-07T10:29:39","modified_gmt":"2025-07-07T10:29:39","slug":"how-to-reduce-hand-injuries-in-your-workstation","status":"publish","type":"post","link":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/","title":{"rendered":"How to Reduce Hand Injuries in Your Workstation"},"content":{"rendered":"\n

Laceration Hand Injuries Safety Tips<\/strong><\/p>\n\n\n\n

Laceration hand\ninjuries are some of the most common injuries in the workplace. They cause a\nwound in the hand of the affected, either in the fingers or on the whole hand\nwhen the body tissues are cut by sharp objects. <\/p>\n\n\n\n

The wound is, in most cases, contaminated by bacteria or other pathogens found on contaminated cutting tools, in form of Bloodborne pathogens dirt or rust. These objects include glass pieces, nails, sharp metals, pinch and rotating parts of a machine, and many more.
<\/p>\n\n\n\n

\"\"<\/figure><\/div>\n\n\n\n

Human error such as\nhandling devices carelessly, improper disposal of glass parts and nails, and\nlack of hand protection and coverage increases hand laceration injuries.<\/p>\n\n\n\n\n\n\n\n

 These injuries can be excruciating depending\non their intensity, and affected firms spend a lot of money providing treatment\nfor the damages. Severe\nhand injuries reduce productivity<\/a> because the injured worker is not able to perform efficiently.<\/p>\n\n\n\n

Apart from being an\nemployer\u2019s responsibility, protecting employees is a requirement by the OSHA laws.\nFailure to play your part in protecting your workers can mean costly\ncompensations that may threaten to wipe out your company.<\/p>\n\n\n\n

OSHA or\nOccupational Safety and Health Administration fall under the United States\nDepartment of Labor and they have laws specifically for \u201ccuts and hand\nlacerations.\u201d The section discusses lots of safety practices including\nequipment safety and workstation designs that employers must comply with.<\/p>\n\n\n\n

Lacerations in the Workplace <\/strong><\/p>\n\n\n\n

Hand laceration\ninjuries in the workplace are a huge problem every employer has to deal with to\nhave a smooth working experience. They can occur in any workplaces and the\ninjuries differ in both effects and treatment procedures. <\/p>\n\n\n\n

Shallow cuts on the\nepidermis layer of the hand’s skin might be easier to deal with as opposed to\ndeep wounds that penetrate deep into the ligaments. <\/p>\n\n\n\n

The extent to which\nthe injury will affect the victim or their performance in the workplace depends\non the depth of the cut and the injured part.<\/p>\n\n\n\n

\"\"<\/figure><\/div>\n\n\n\n

 A cut on the palm of your hand or your fingers\nwill affect your handling of work tools or machines significantly than a cut on\nany other part of the arm.<\/p>\n\n\n\n

Laceration hand\ninjuries are a day to day experience in the workplaces that don\u2019t care about\nsafety. When they occur, staffs are injured and some disabled for life. The\nresponsible company must also compensate for treatments.<\/p>\n\n\n\n

These frequent\nexpenditures on laceration hand injuries accumulate to a high amount of money\nat the end of a month or a year. It is, therefore, important that employers\nfind a way of addressing laceration hand injuries to reduce expenditures on\ntreatments.<\/p>\n\n\n\n

Best practices such\nas proper disposal of glasses, nails, parts of metals, and handling work tools\nand machines with care can help you avoid frequent laceration hand injuries.<\/p>\n\n\n\n

The Consequences of Cuts and Hand Lacerations<\/strong><\/p>\n\n\n\n

Laceration hand\ninjuries have diverse consequences ranging from the effects to the injured\nworker, the workmates, to the company itself. They instill pain in you and\nhinder you from handling work tools properly.<\/p>\n\n\n\n

 In severe cases, injured staff can be forced\nto go on work leave, which affects the workplace in many ways. <\/p>\n\n\n\n

Victims can also contract\ndiseases from cutting objects such as tetanus and other\nbloodborne infections if you get injured by equipment that has been\ncontaminated<\/a> by\nfluids from infected persons. <\/p>\n\n\n\n

Some cuts on the\npalm or fingers may be so severe that they may have to live with those for\ntheir entire lives. This will change the life of an employee from then\nhenceforth, or render them incapable of working in the same workplace again, and\nthe company is forced to fill the left gap.<\/p>\n\n\n\n

Apart from not\nbeing able to work, the victim is also unable to do their daily activities such\nas operating a phone, washing clothes and utensils, typing, shoelace tying,\ncycling, and driving or riding a motorcycle in severe cases. <\/p>\n\n\n\n

This may mean incurring\nadditional expenses on such things if they don’t have someone to help them out.\nThis might make the victim dependent on the people around them, and that isn’t\nalways satisfying, is it? This condition will make life more stressful for an\nemployee because they will have to be assisted in accomplishing the simplest of\ntasks.<\/p>\n\n\n\n

Cases of laceration\nhand injuries not only affect the victim, it also takes a toll on their workmates.\nColleagues will have to adjust to fill the blank space by handling the job\nactivities that you\u2019re unable to handle. <\/p>\n\n\n\n

This will add to\ntheir list of activities and reduce their productiveness in the workplace. When\nthe injuries are so severe that one must take days or weeks off to get treatment,\nworkmates will have to do extra work to keep the company up and running. <\/p>\n\n\n\n

Working overtime or\nhandling too many tasks leads to a lot of fatigue in the workplace, and workmates\nwill have a hard time conducting their daily operations. More injured and\nhospitalized staff increases the risks of worker burnout which again exposes\nother workers to cuts and lacerations.<\/p>\n\n\n\n

The company also\nfaces a lot of challenges when laceration hand injury occurs. When one is\ninjured at work, the company uses money to cater for your treatment, and this\ncomes as added expenses on the organization’s budget. <\/p>\n\n\n\n

The employer will\nalso spend a lot on the compensation process each time a worker is injured\nwhile on duty. If you must go for a treatment leave, the company will have to\nadjust itself to accommodate your role and daily tasks at the workplace. <\/p>\n\n\n\n

This may affect the\noverall performance of the company, and if the injured contributed a\nspecialized skill set, the company will have to spend a lot of money hiring a\nreplacement.<\/p>\n\n\n\n

Prevention Techniques<\/strong><\/p>\n\n\n\n

Having understood\nthe dangers of laceration hand injuries in workplaces, and their far-reaching\neffects to colleagues and the entire organization, it is easy to tell that\nthese injuries are a major concern among workers. <\/p>\n\n\n\n

\"\"<\/figure><\/div>\n\n\n\n

It should,\ntherefore, an employer\u2019s priority to prevent these hand injuries or reduce their\nincidences to a minimum. Mitigations starts by training\nall the people in the workplace about laceration hand injuries, their dangers\nand their prevention<\/a>. <\/p>\n\n\n\n

Creating awareness from\ntime to time on the effects of hand injuries among all your colleagues will\ncreate a sense of shared responsibility in reducing injury risks. This will ensure\nstaffs handle work tools and machines carefully. It will also ensure they\ndispose of metals and glasses, among other harmful wastes properly.<\/p>\n\n\n\n

Next, employers\nwant to ensure employees are working with safe tools and in a safe work\nenvironment. The tools and working machines should be in good working\ncondition, well serviced, and maintained. <\/p>\n\n\n\n

Training workers on\nhow to use the tools and work machines is an excellent way to start reducing\nthe incidence of injuries. Each worker should be supplied with safety materials\nsuch as gloves, eye protection materials, and helmets. <\/p>\n\n\n\n

Each tool should be\nkept away in a safe storage when not in use. A toolbox will serve this purpose\neffectively. When storing tools, sharps shouldn’t be kept away from other\ntools.<\/p>\n\n\n\n

Organizations can\nalso create a long term safety program in your workplace where you can train\nworkers on how to stay safe and award the groups or individuals that stick to\nbest practices.<\/p>\n\n\n\n

You should also\ntake disciplinary measures against those who do not follow safety rules in the\nworkplace. <\/p>\n\n\n\n

Do not tolerate any\nemployee using any tool without wearing the necessary safety materials such as\ngloves, eye protection, and a helmet. This will accustom your workers to\nwearing protective gear.<\/p>\n\n\n\n

Re-thinking Your Work Processes<\/strong><\/p>\n\n\n\n

In this process, an\norganization designs its tools to provide the safest working experience for staff.\nActivities that are risky to human beings should be done by machines to enhance\nsafety. <\/p>\n\n\n\n

All tools should\nhave a good grip to ensure comfort during use. They must also fit into the\nworker’s hand properly. If workers have to move around during the working\nprogress, the movements should be natural and as safe as possible.<\/p>\n\n\n\n

Organizations must\nalso design safe workstations by making changes such as ensuring adequate space\nbetween equipment, putting machines fare away from pathways or frequently used,\nproviding enough lighting and so on. <\/p>\n\n\n\n

 Giving workers enough time to rest is also a\ngreat idea. This will help reduce fatigue, increase their performance, and ensure\ncareful handling of tools.<\/p>\n\n\n\n

Exhausted people\nare more likely to accidentally drop a tool or mishandle it as compared to\nrefreshed workers.<\/p>\n\n\n\n

Guarding to Reduce Hand Injuries\/Cuts<\/strong><\/p>\n\n\n\n

Each cutting edge\nshould be well guarded to reduce their exposure. Power saws and other related\nmachines are safer when guarded. Guarding ensures that anyone handling\nequipment does not touch sharps accidentally. <\/p>\n\n\n\n

An example is creating\nknives\nthat automatically retract when not in use<\/a>. <\/p>\n\n\n\n

When all cutting\nedges are well guarded, and the guards are sturdy, there are minimal chances of\nsuffering laceration hand injuries.<\/p>\n\n\n\n

Safer Cutting Tools for Safer Cutting on the Job<\/strong><\/p>\n\n\n\n

Safety in cutting\ntools is determined by how the tools are designed to fit their work. One of the\nsafety features in a tool is the ability to retract when not in use, as\nexplained above. <\/p>\n\n\n\n

The gripping\nability of the tool is vital because it ensures that the tool doesn’t slip off\nthe worker’s hand during use. Tools with good grip are safe and do not easily\ncause injuries as opposed to tools with poor grip. <\/p>\n\n\n\n

You have to ensure\nthat the tools used in your workplace have a good grip. Frequent servicing and\ngood maintenance practices means safer working tools.<\/p>\n\n\n\n

Safe cutting is\nalso key in creating an injury-free working place. Cuts reduce when workers master\nhow to use tools properly and learn ways in which they can protect themselves\nfrom injuries while working. <\/p>\n\n\n\n

Organizations\nshould ensure that there is freedom of expression in the workplace so that\nworkers can freely speak out in case a tool or machine malfunctions. For\nefficiency, employers can empower some workers in different departments to\nregularly check the tools and authorize repair or replacement when necessary. <\/p>\n\n\n\n

This will help in\naddressing all working tool issues easier and better. Employers can also demand\na weekly or monthly check of the tools and a clear report to ensure all\nequipment is safe.<\/p>\n\n\n\n

Using preventive materials such as gloves<\/strong><\/p>\n\n\n\n

Laceration hand\ninjuries can be prevented in different ways, and one of them is using\npreventive materials. <\/p>\n\n\n\n

These materials vary\naccording to the type of tools used in your workplace. They include helmets,\neye protectors, gloves, or any other protective materials. <\/p>\n\n\n\n

You can use gloves\nin this case, which will also vary in cut resistance levels and dexterity. You\nwill have to choose the gloves that can prevent cuts from the tools used in\nyour workplace. <\/p>\n\n\n\n

Try to acquire the\nmost comfortable preventive materials that won’t be awkward to work with, or tools\nthat can make work more tedious. A good laceration hand injury prevention\nmaterial should be able to increase the worker’s enthusiasm at work.<\/p>\n\n\n\n

You can also to lay\ndown strict rules towards the use of gloves to ensure that no one is handling tools\nwithout their gloves on. Make it a must-do to wear gloves when hand handling\ntools to cultivate safe working habits in your workplace. <\/p>\n\n\n\n

The Role of Training in Reducing Risks<\/strong><\/p>\n\n\n\n

You must appreciate\nthe power of knowledge, and the importance of educating staff\non different safety practices. <\/p>\n\n\n\n

It is the best way\nto solve problems due to human-error. You can start by ensuring that each\nworker knows how to use the tools properly and safely. <\/p>\n\n\n\n

\"\"<\/figure><\/div>\n\n\n\n

This will not only\nbe achieved by reading the manufacturer’s guidelines. You can have an expert provide\nhands-on training on safe handling of tools and machines. <\/p>\n\n\n\n

Remember, practical\nsessions will make more impact than lectures. This will give them a clear\nunderstanding and reduce the possibility of equipment mishandling. <\/p>\n\n\n\n

Through this, your\nworkers will also have a clear knowledge about the tools and master how to use\nthem efficiently.<\/p>\n\n\n\n

The other part of\nthe training that will yield amazing results is creating awareness about the\nrisk of lacerations hand injuries and how they can be avoided. <\/p>\n\n\n\n

Through this, your\nworkers will be well-equipped to protect themselves. Remember; everyone wants\nto be safe, providing training can make them safer.  <\/p>\n\n\n\n

You can plan\nregular training programs led by safety experts, either monthly or yearly,\naccording to the technicality of the tools and machines used in your workplace.\n<\/p>\n\n\n\n

More awareness can\nbe created by adding \u201csafe material handling\u201d and \u201cworkplace wellbeing\u201d posters\naround the workstation. That way, you remind your workers on the safest\npractices when carrying out their daily duties.<\/p>\n\n\n\n

A set of workers\nshould undergo training on machine and tool assessment. They should be able to\nassess all the parts of the tools and machines, such as rotating and cutting\ncorners, and the joints of cutting edges to ensure that they are firm. <\/p>\n\n\n\n

Your workers should\nalso be trained on how to position themselves as they use the equipment to\nreduce hand injuries. Remind them during training to keep their hands off rotating\nor cutting tools when operating machines. <\/p>\n\n\n\n

Hands must be protected\nwhen operating any equipment that uses or requires too much force to manipulate.\nTraining\nworkers on personal safety<\/a>\nand safe use of equipment can also reduce cuts and hand lacerations caused by\nusing excessive force on a tool.  <\/p>\n\n\n\n

You should also\nensure that every task is accomplished with the right tool. Using the wrong\ntool often leads to hand injuries in workplaces. Every tool is built for a specific\npurpose, using it for jobs other than its intended function can pose injury\nrisks. <\/p>\n\n\n\n

Any broken or\nmalfunctioning tool should be repaired or replaced to avoid a shortage of tools\nin the workstation. Using broken tools also increases the risks of cuts and\nlacerations. In fact, using faulty equipment is an open danger to the user.<\/p>\n\n\n\n

Next, remind your\nemployees of the importance of paying attention in a workstation. <\/p>\n\n\n\n

Though accidents\nare inevitable, past experiences can confirm that attentive and safety-savvy\nworkers are less likely to mishandle a tool or machine; and are, therefore,\nless likely to get cuts and lacerations while on the job. <\/p>\n\n\n\n

An attentive\nworkforce also means more precision and more desirable outcomes. A careful team\nof staff will easily notice any malfunctioning tool or equipment, or worn out\nmachine parts in good time. <\/p>\n\n\n\n

This kind of\nprecaution reduces cases of cuts and lacerations due to faulty equipment\nensuring timely repair or replacement.<\/p>\n\n\n\n

Alongside reducing\nlaceration hand injuries, training your workers will also give your company or\nworkshop an amazing growth pace. <\/p>\n\n\n\n

Picture a workplace\nwith little to no injuries and cases of cuts and lacerations among employees.\nIt is more productive because every member of the team is safe and sound, and\nplaying their part to push the firm to the next level.<\/p>\n\n\n\n

Employee safety\nshould be the employer\u2019s priority. Provide protective gear and repeat safety\nover and over again until it becomes a culture in your organization.<\/p>\n\n\n\n

You don\u2019t want to\nbe the reason an employer loses a finger, their eye or suffers an injury that\nwill impact the rest of their lives because of a carelessly maintained job\nsite.<\/p>\n\n\n\n

Make it your\nresponsibility to reduce the risks of an injury in the working environments. You\nhave to ensure your workplace is safe and in good working condition. <\/p>\n\n\n\n

You can also reduce\nwaste products such as glass and metal materials in by implementing a\nwell-though-out disposal plan. <\/p>\n\n\n\n

This will ensure\nproper disposal of sharps that are likely to cause an injury in the site.\nTraining your workers on proper waste disposal will help in keeping the working\nenvironment safe. <\/p>\n\n\n\n

Sharp wastes must\nbe stored separate from all other forms of waste. Workers can easily get\ninjured when transferring these wastes to dump sites.  Do away with sharp tools and wastes as soon as\nyou possible to reduce the risks of injuries in the work zone. <\/p>\n\n\n\n

A free navigable\nand less cluttered workplace is less prone to hand injuries from sharps than a\ncrowded area where you have to push things aside to make your way.<\/p>\n\n\n\n

You also want to\nensure breaks in between work sessions to reduce\ncuts and lacerations caused by staff burnout<\/a>.<\/p>\n\n\n\n

When people are\ntired, they are more prone to making mistakes and mishandling tools. Do not\noverwork your staff. Organize break sessions where drink some water; take some\nenergy foods and  check on each other\u2019s wellbeing\nas you prepare for the next list of tasks.<\/p>\n\n\n\n

Use different crews\nfor different shifts if you must work round-the-clock.<\/p>\n\n\n\n

In Summary<\/strong><\/p>\n\n\n\n

Laceration hand\ninjuries, being the most common among all injuries, affect the injured, their\nworkmates, and the entire company as well. <\/p>\n\n\n\n

When a worker is\ninjured, they cannot handle their tasks as usual and may also be completely\nunable to use certain tools in the workplace. This takes a toll on other workmates\nwho must do overtime or burnout to fill the gap. <\/p>\n\n\n\n

The company might\nalso incur some additional costs in hiring an expert to take over the duties of\nthe victim in case she\/he contributed a specialized skill set. <\/p>\n\n\n\n

Re-engineering, use\nof the right tools for the right work, training your workers on how to use the\nworking tools and other equipment, creating awareness among the workers on the\nimportance of safety at the workplace and providing protection materials such as\nhand gloves, are some of the ways you can use to reduce hand laceration\ninjuries. <\/p>\n\n\n\n

Providing workers\nwith the right and safe tools will increase safety levels in your job site.\nThis means ensuring you have all necessary tools in your workplace, and all workers\nare familiar with how to use these safely. <\/p>\n\n\n\n

In the end, reducing\nhand laceration injuries protects both your workers from injuries and you from\nlosses incurred from treatments and compensations.<\/p>\n","protected":false},"excerpt":{"rendered":"

Laceration Hand Injuries Safety Tips Laceration hand injuries are some of the most common injuries in the workplace. They cause a wound in the hand of the affected, either in the fingers or on the whole hand when the body tissues are cut by sharp objects. The wound is, in most cases, contaminated by bacteria […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[],"class_list":["post-13212","post","type-post","status-publish","format-standard","hentry","category-cpr"],"yoast_head":"\nHow to Reduce Hand Injuries in Your Workstation<\/title>\n<meta name=\"description\" content=\"CPR blog for How to Reduce Hand Injuries in Your Workstation\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Reduce Hand Injuries in Your Workstation\" \/>\n<meta property=\"og:description\" content=\"CPR blog for How to Reduce Hand Injuries in Your Workstation\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/\" \/>\n<meta property=\"og:site_name\" content=\"Online CPR Certification Blog | World News in Medicine\" \/>\n<meta property=\"article:published_time\" content=\"2020-01-04T12:44:52+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-07-07T10:29:39+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.onlinecprcertification.net\/blog\/wp-content\/uploads\/2020\/01\/anp1.png\" \/>\n<meta name=\"author\" content=\"Admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"15 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/\",\"url\":\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/\",\"name\":\"How to Reduce Hand Injuries in Your Workstation\",\"isPartOf\":{\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.onlinecprcertification.net\/blog\/wp-content\/uploads\/2020\/01\/anp1.png\",\"datePublished\":\"2020-01-04T12:44:52+00:00\",\"dateModified\":\"2025-07-07T10:29:39+00:00\",\"author\":{\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/#\/schema\/person\/54248b57c4973c8f339e90ca1ad2b46b\"},\"description\":\"CPR blog for How to Reduce Hand Injuries in Your Workstation\",\"breadcrumb\":{\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#primaryimage\",\"url\":\"https:\/\/www.onlinecprcertification.net\/blog\/wp-content\/uploads\/2020\/01\/anp1.png\",\"contentUrl\":\"https:\/\/www.onlinecprcertification.net\/blog\/wp-content\/uploads\/2020\/01\/anp1.png\",\"width\":624,\"height\":368},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.onlinecprcertification.net\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Reduce Hand Injuries in Your Workstation\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/#website\",\"url\":\"https:\/\/www.onlinecprcertification.net\/blog\/\",\"name\":\"Online CPR Certification Blog\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.onlinecprcertification.net\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/#\/schema\/person\/54248b57c4973c8f339e90ca1ad2b46b\",\"name\":\"Admin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.onlinecprcertification.net\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/02633b4fc66ccd10394db68cc59a903a6ca17029064cd9a9e664a1d84afeba2b?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/02633b4fc66ccd10394db68cc59a903a6ca17029064cd9a9e664a1d84afeba2b?s=96&d=mm&r=g\",\"caption\":\"Admin\"},\"sameAs\":[\"https:\/\/www.onlinecprcertification.net\/blog\"],\"url\":\"https:\/\/www.onlinecprcertification.net\/blog\/author\/admin\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"How to Reduce Hand Injuries in Your Workstation","description":"CPR blog for How to Reduce Hand Injuries in Your Workstation","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/","og_locale":"en_US","og_type":"article","og_title":"How to Reduce Hand Injuries in Your Workstation","og_description":"CPR blog for How to Reduce Hand Injuries in Your Workstation","og_url":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/","og_site_name":"Online CPR Certification Blog | World News in Medicine","article_published_time":"2020-01-04T12:44:52+00:00","article_modified_time":"2025-07-07T10:29:39+00:00","og_image":[{"url":"https:\/\/www.onlinecprcertification.net\/blog\/wp-content\/uploads\/2020\/01\/anp1.png","type":"","width":"","height":""}],"author":"Admin","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Admin","Est. reading time":"15 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/","url":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/","name":"How to Reduce Hand Injuries in Your Workstation","isPartOf":{"@id":"https:\/\/www.onlinecprcertification.net\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#primaryimage"},"image":{"@id":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#primaryimage"},"thumbnailUrl":"https:\/\/www.onlinecprcertification.net\/blog\/wp-content\/uploads\/2020\/01\/anp1.png","datePublished":"2020-01-04T12:44:52+00:00","dateModified":"2025-07-07T10:29:39+00:00","author":{"@id":"https:\/\/www.onlinecprcertification.net\/blog\/#\/schema\/person\/54248b57c4973c8f339e90ca1ad2b46b"},"description":"CPR blog for How to Reduce Hand Injuries in Your Workstation","breadcrumb":{"@id":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#primaryimage","url":"https:\/\/www.onlinecprcertification.net\/blog\/wp-content\/uploads\/2020\/01\/anp1.png","contentUrl":"https:\/\/www.onlinecprcertification.net\/blog\/wp-content\/uploads\/2020\/01\/anp1.png","width":624,"height":368},{"@type":"BreadcrumbList","@id":"https:\/\/www.onlinecprcertification.net\/blog\/how-to-reduce-hand-injuries-in-your-workstation\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.onlinecprcertification.net\/blog\/"},{"@type":"ListItem","position":2,"name":"How to Reduce Hand Injuries in Your Workstation"}]},{"@type":"WebSite","@id":"https:\/\/www.onlinecprcertification.net\/blog\/#website","url":"https:\/\/www.onlinecprcertification.net\/blog\/","name":"Online CPR Certification Blog","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.onlinecprcertification.net\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.onlinecprcertification.net\/blog\/#\/schema\/person\/54248b57c4973c8f339e90ca1ad2b46b","name":"Admin","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.onlinecprcertification.net\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/02633b4fc66ccd10394db68cc59a903a6ca17029064cd9a9e664a1d84afeba2b?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/02633b4fc66ccd10394db68cc59a903a6ca17029064cd9a9e664a1d84afeba2b?s=96&d=mm&r=g","caption":"Admin"},"sameAs":["https:\/\/www.onlinecprcertification.net\/blog"],"url":"https:\/\/www.onlinecprcertification.net\/blog\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/posts\/13212","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/comments?post=13212"}],"version-history":[{"count":1,"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/posts\/13212\/revisions"}],"predecessor-version":[{"id":17539,"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/posts\/13212\/revisions\/17539"}],"wp:attachment":[{"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/media?parent=13212"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/categories?post=13212"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.onlinecprcertification.net\/blog\/wp-json\/wp\/v2\/tags?post=13212"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}